The Altertek State of Charge Gauge is intended to be mounted behind a bulkhead that simply connects to the battery and load which through coulomb counting accurately calculates the State of Charge of the battery.
The Altertek SOC gauges has an onboard precision coulomb counter which integrates current through a sense resistor (or external shunt) between the battery’s positive terminal and the load or charger.
Measuring both current and voltage allows the state of charge to be accurately calculated, rather than estimated from the voltage alone. The SOC gauge can give an accurate reading down to 1% accuracy.
State of charge is displayed using 10 coloured LEDs for quick visual indication.
The SOC Gauge features programmable high and low thresholds and the capacity of the battery can be selected by the installer without any additional equipment.
If a programmed threshold is exceeded, the device communicates an alert using the on board LEDs and external alarm contacts so diagnosis of the problem is fast and easy.
The product can be set to be permanently on or display when the onboard button is pressed to save power.
The onboard current sensor can measure a maximum of 25A load or alternatively an external Shunt can be added to measure loads up to 500A.
5 Year Warranty
Maintenance Free
UK Manufactured
Free Support
On board Communications
Scalable
Ni-CAD
Li-ION
Lead Acid
12V
24V
36V
Model GG1117-A
Physical
Environmental
Length 100mm
Operating Temperature Range -40 - +60 Deg C
Width 50mm
Storage Temperature Range 20 Deg C +/- 5 Deg C
Depth 20mm
Humidity 50% RH
Weight 2KG
Product Features
Environmental
Non Parasitic
Hardware Based Over and Under Voltage Protection
Passive Cell Balancing
Dual Cell Temperature Measurement
State of Charge Indication
Onboard Circuit Temperature Measurement
Fault Indicator
Built in self tests
Balance Indicators
Fail on*
2 x Software Controlled Relay Drivers
* Fail on is still subject to hardware based safety
External Fault Sensor Input
CAN Bus Communication
Operating Limits
Approvals
Nominal Voltage 12, 24, 36V
Directives: CE
Balance Current 1A Max
RoHS
Relay Driver Current 300mA Max
EMC
Power Consumption 1W
WEEE
Max Number of cells or strings 12
Standards: EN1111111
Max Serial Voltage 96v
EN2222222
Max Parallel Capacity XXX
EN3333333
Want to work with us to build your solution?
0330 333 5034
info@altertek.com